I chose the best, in my opinion, the size of the rib-pyramid bags - 13-14 cm.
For work, we need:
Materials
- The fabric top
* 15 x 30 cm - 1 length
- Inner fabric (lining)
* 15 x 30 cm - 1 length
- Soft knitted woven interfacing (not elastic)
* 15 x 30 cm - 1 length
- Volumetric adhesive Vlieseline H630 or H640.
* 15 x 30 cm - 1 length
- A thin Vlieseline (25 g / m)
* 15 x 30 cm - 1 length
- Zipper 12 cm.
- 2 length narrow straps (belt tape)
Instruments
- Scissors / knife for patchwork
- line
- Needle / sewing machine
- iron
- Handmade hands
- On the tissue marker washes away or disappearing
- Go to the top of the fabric we glue woven interfacing first, and then on top of his voluminous Vlieseline.
- For the lining fabric glue a thin Vlieseline.
Sew on the zipper to the front details (Do not touch lining).
3.1) is applied to the zipper of one of the narrow sides of the details to be pinned and sewn.
3.2) For the zipper is convenient to use a special hold-down clip.
3.3) Fold detail in half (right side facing) and sew the second the edge of in the second half zipped. "Tube" should get.
3.4) Pieces of straps (ribbon belt) fold in half, to get a loop and sew one layer of fabric in places where the dotted line.
4.1) gut-wrenching detail, the front side is to stay inside. Place a zipper strictly in the middle. Fastening the lower part (where the lower part of zipped) and do a straight stitch.
4.2) Unzip the bag!
4.3) The second side of the fold in half, but the the edge of zipped should now be in one of the corners.
4.4) clipped corners.
5.1) tucking fabric with narrow sides by 1.5 cm
5.2) Wrap the part in the middle, leaving a gap equal to the width of the zipped in the front part.
5.3) Make a straight seam on one side.
5.4) Similarly, the front of the form a pyramid and sews.
6.1) If the previous step you did everything correctly, then lining the item will look like.
6.2) Fitting! Insert lining into the front detail wrong side to each other, to see how the lining "is" if it puffs up and winces, then at this stage it is necessary to adjust the size.
6.3) Once the liner is sized to fit the entire construction to turn out, and now the front part was inside and the outside lining.
6.4) We combine stitches and carefully sew a hidden seam lining to the main portion of perimeter zipped.
Finish!
0 comments:
Post a Comment