DIY Mini Purse Wallet FREE Sewing Tutorial. Small pockets for storing car documents.
MATERIALS:
- A 29.7 cm x 15.2 cm leather rectangle (rounding off 2 corners on one 15.2 cm side)
- One 13.5 cm x 6 cm leather rectangle (rounding off 2 corners on one 13.5 cm side)
- Fabric
- Fine vlieselin
- A snap fastener
1 - Cut the leather rectangle to size and cover the fabric with Vilene (to prevent fraying at the edges).
2 - Make the appliqué in leather or canvas (on the side with rounded edges):
3 - Cut the canvas slightly larger than the leather pieces (cut after assembly for more precise cutting):
4 - Assemble by stitching 2 or 3 mm from the edge:
5 - Cut off excess fabric:
6 - Assemble the front pocket (on the unrounded side), positioning it 3.3 cm from the top (yes, that's precise ;) ). Stitch the sides and bottom of this pocket (not the top, otherwise you won't be able to put anything in!), taking care to aim into the previous seam:
7- Then stitch on the middle to create the separation:
8 - Assemble the pouch by folding the bottom:
9 - Stitch the sides and bottom again, taking care to stitch through the previous seam and rounding off the corners:
10 - Cut the excess leather in the corners:
11 - Install the push-button :
You're done!
0 comments:
Post a Comment