Quick and Easy Make-up Bag Tutorial

 

Envelope Style Makeup Bag Tutorial: Boho Blossom. Quick and easy make-up bag with tutorial.

I found quite a few tutorials and freebies online, but they all had zippers. I thought I would try to come up with one that doesn't have a zipper, since I doubt she has one on hand.
My first one was cute, but way too small. Will have to try it again later.
This one came out very cute and didn't take too long. Here is a quick tutorial.

I didn't take many pics but it was pretty easy and I will try to give good instructions.
For this make-up bag you will need 2 FQ's: one outside fabric and 1 lining
Paper to draw your pattern
Stiff fusible interfacing or fusible fleece
Small piece of velcro
One button
Ruler

I happened to have a template for the envelope top of the bag, but you can draw this, it should be 10" wide at the bottom.

Draw another pattern for the bag body. It will measure 10" across at the top and taper out 1" on each side to make 12" across the bottom.

Cut two of the bag body from each fabric. Cut one of the envelope top from each fabric. Cut 2 of the bag body pieces from the interfacing or fleece and one of the envelope top. Trim these to approx. 1/2" smaller all the way around. Fuse the interfacing to the outside bag pieces.

With right sides together stitch around the curved edge of the envelope top, leave bottom open. Clip curves, turn and press. Topstitch around the finished edge.
Press under 1/2" along top edge of the bag body. Open pressed edge and stitch sides and bottom edge taking a 1/2" seam. Press seams open and turn under the pressed edge.

Open the corner out to form a triangle, make sure that side and bottom seams are lined up. Use a pencil or marker to mark a 2" line across the triangle one each side of bag.
Stitch on line and trim excess triangle away.
Turn and press well.


Make the lining the same way as you did the outside bag. Do not turn. Place the lining inside the bag and line up side seams to match.

Insert the unfinished edge of the envelope top into the back top edge of bag between the layers. Pin securely. Stitch very close to edge (about 1/8") all the way around.

Position a 1" piece of velcro to match and stitch or glue it in place. I use a heavy duty fabric glue because I am not fond of stitching velcro, but stitching it would be good too.

If you want you can stitch a decorative button on the front, just to add to the cuteness.